Feature Ads

17ft GRP day boat 17ft GRP day boat
£ 1,950
Westerly Centaur 26ft bilge keeler Westerly Centaur 26ft bilge keeler
£ 3,750
Latrex 400 MONO HULL Latrex 400 MONO HULL
£ 2,099

Sailing boat For Sale - 18th Century Replica Topsail Schooner, Second-hand

£125000
£125000
Lying: Cardiff
Contact Wooden Ships

Please mention BoatStar when responding to this advert

Contact: Wooden Ships (Trade)

£125000

Cardiff

11950

Grumant Shipyard, Russia / 18th Century Replica Topsail Schooner

1995

59'ft/ 17.98m


Boat Description

Full specification
Wooden Ships Comments on this 18th Century Replica Topsail Schooner
Built in Russia in 1995 as one of 5 similar boats, replicas of an 18th century Baltic packet ship. The boats were built in the naval yard of Grumant, mainly by apprentices. The quality of work was good, but the materials used were not and within a short period of time there was found to be extensive rot in the hull structure.
The ship ended up in Cardiff and was put ashore, under a vast marquee, where the rebuild work started. The majority of the original laminated frames were replaced, the centreline structure replaced as necessary, all new planking, a complete new deck and transom. She is essentially a new ship in need of completing.
Due to financial circumstances the ship is being sold as is, ready for the next owner to complete her.
There is very little work to do before she could be launched and towed away. There is an engine of unknown condition with the boat. The majority of the spars are with her but no sails. The interior fit out has been started but needs to be completed to the new owners specification.
A superb ship for film work or some kind of charter business, she is a brand new hull presented as a blank canvas for a new owner to finish as they wish.
Length on deck 59'
Length Overall 97'
Beam 15'2"
Draft 7'6"
Sail Area 234sqm
Construction

Planked in 2" Siberian larch in long lengths of good quality clear grained timber. All planking is new. Seams payed with pitch.
Fastened with galvanised boat nails to sawn oak frames. A few original pine frames remain but the vast majority are new in seasoned oak.
Mix of sawn timber and galvanised strap floors across the centreline.
All keel bolts new in galvanised mild steel.
Internal ballast of iron pigs. The intention was to cover the loose ballast with concrete and add an external steel shoe for extra weight. The amount of ballast required was professionally calculated and planned.
Solid straight laid iroko deck, caulked and payed on new iroko deck beams. Raised poop deck aft.
Skylight and hatch coamings in iroko.
Bulwark all round on heavy stanchions.
Heavy transom hung wooden rudder on new galvanised hangings. Tiller steering with a large laminated tiller.
Rig
Built with a topsail schooner rig to original 18th century plans.
The majority of the spars are with the vessel and in good order, only 3 smaller spars will need to be made.
Solid timber keel stepped masts with fidded topmasts.
The plan had been to fit rope standing rigging to dead eyes and lanyards, however a new owner could use galvanised wire.
Many brand new wooden blocks have been made for the new rig and will be sold with the boat. Numerous other rigging parts already made up are included.
There are no sails with the vessel.
Machinery

Volvo Penta TAMD 41HD145hp 6cyl turbo diesel engine included in the sale but not currently installed. The actual condition of this engine is unknown.
The engine beds are in place and the stern tube hole is has been drilled out ready for the new stern gear. No shaft or propeller.
2 x stainless steel fuel tanks are in place in the engine room, total capacity of 1500 litres
Accommodation

Some fit out has been completed below decks but could be altered to suit the new owner and the future purpose of the vessel.
Aft cabin with 4 single berths and a heads compartment. Currently no heads fitted.
Large saloon area with a seating area and central saloon table.
Space for a large galley to starboard and heads/shower compartments to port.
Aft of this is an empty space that will likely be made into several cabins.
Forward of the saloon is a newly fitted out crew cabin with 5 single berths
Equipment
2 x manual bilge pumps
2 x electric bilge pumps
2 x Fishermans anchors
CQR kedge anchor
Masts and numerous spars
Lots of rigging parts including many new wooden blocks.
Full specification and details available upon request
Disclaimer:
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
Full Specifications

Dimensions
Length:59'ft/ 17.98m
Beam:15'2"
Engines/Propulsion
Num Engines:1
Engine Make/Model:Volvo Penta TAMD 41HD145hp 6cyl turbo
Fuel Type:Diesel
General
Designer:Traditional
Heads:Yes
Hull Material:wood
Disclaimer: These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
Please ensure that you check with the seller that the details in this advert are still correct before arranging to visit or buy. If you find any advert which is no longer correct then please let us know so we can keep the site as accurate as possible.