Wooden Ships Comments on this Robert Clark 8m Cruiser Racer
Designed by Robert Clark and built by Millers of St Monans in 1939. Millers were better known for their fishing vessels and yacht derivatives of those vessels, but they built a good number of fine yachts, this being no exception. It is thought her design was influenced by the 8 metre rule and that she is an 8m Cruiser/Racer at heart, something evident in her elegant long counter and long narrow hull.
In her early years she proved to be a very fast boat with many notable finishes in coastal races around the UK. In the early 1950's her mast height was reduced by 8' to make her more easily handled by a small crew and she was sailed to Brazil where she remained for 8 years before coming home. The new mast fitted in 2011 is of the lower height meaning she is not as fast as she was when first launched but is also much easier to handle.
She has been in the present ownership for nearly 30 years and has been cruised around the West Country and France, has appeared at numerous classic yacht regattas and has been raced gently in those events. This spring she had a fresh survey and a refit to follow in order to take care of the small points raised. She is now afloat, in commission and ready to go sailing this season.
2018 survey available.
Length on Deck 40'
Thames Tonnage 12TM
Carvel planked in Honduras mahogany copper clench fastened to sawn oak frames with 2 steamed intermediate oak timbers.
Cast iron ballast keel with iron keel bolts.
Iron strap floors fastened with large copper rivets.
Original external Cascover sheathing on the hull removed and replaced with epoxy and glass mat. Thoroughly surveyed and inspected in April 2018 with few defects detected.
Supporting clamp on the beamshelf in way of the rigging with heavy original steel plate hanging knees to add stiffness.
Original laid deck was overlaid with marine plywood and sheathed externally, finished in off-white deck paint. High varnished teak toe rail all round with stainless stanchions mounted through the deck.
Varnished teak coamings to the coahroof and doghouse with bronze framed port lights.
Self draining cockpit with seating at deck level and varnished teak coamings all round. Tiller steering.
Bermudan sloop rig on a keel stepped hollow wooden mast. Mast new in 2011. Original mast fittings kept.
Stainless steel standing rigging to internal stainless chain plates. Rigging new in 2013.
Varnished wooden slab reefing boom with a double tailed mainsheet.
Roller furling headsail with a ProFurl system, new in 2013.
2 x Lewmar 16 self tailing winches on the mast, new in 2018.
Pair of bronze sheet winches on the cockpit coamings.
Full suit of sails.
Beta Marine 20hp 3 cyl diesel new in 2011 with only 146hrs running (April 2018)
Hydraulic drive to a centreline 3 blade Darglow feathering bronze propeller new in 2011. re-pitched in 2018 by Darglow.
3 x 12 volt service batteries and a dedicated engine start battery, all new in 2011. Charged from the engine alternator or through the installed shore power system.
100 litre stainless fuel tank under the aft deck gives approximately 500Nm range
Stainless steel water tank under the cabin sole.
5 berths including a quarter berth, 2 saloon settee berths and twin V-berths forward.
Plenty of original joinery and fittings throughout the boat.
Steps down from the cockpit into the dog house with quarter berth to port and chart desk in the forward port corner. Storage locker to starboard with engine controls and switch panel above.
Starboard steps down into the saloon with a large heads compartment to port with a Baby Blake manual sea toilet and hand basin.
Galley to starboard with Flavel gas stove, single stainless sink and stowage. Portable 12 volt electric fridge box.
Main saloon has a nice feel with plenty of period joinery and full length settee berths either side.
Centreline passageway forward into the forepeak with twin V-berths and lots of storage space for sails and equipment.
Full specification and details available upon request
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
|Engine Make/Model:||Beta Marine|