Harrison Butler Zyklon Class - Boat For Sale, Second-hand

Click to enlarge image of Harrison-Butler-Zyklon-Class-Boat-For-Sale-Second-hand
Click here to enlarge the thumbnails
Click to share on Facebook

Category:Boats
Section:Sailing Boats
Reference:6462
Make:Probert Brothers, Swansea
Model:Harrison Butler Zyklon Class
Build Year:1950 (Second hand)
Location:Cornwall
Price:£2,000
View Full Specifications
Contact Seller
Wooden Ships
Please mention BoatStar when responding to this advert
Boat Description

Wooden Ships Comments on thisHarrison Butler ZyklonClass
A design by Harrison Butler built by Probert Brothers, Swansea. The build was started before WWII but as with many boats this was put on hold during the war years and she was completed and launched in 1950. Until the late 1960's she was owned by Mr D.G. Probert of Milford Haven. She is sail No. Z278.
She is one of only 10 Zyklon class boats built as opposed to 52 of the Z4 Tonners. Her hull is to the standard Z4 design but she has raised topsides which hugely increases the interior volume of the boat. This alteration was designed by Cpt O.M. Watts and proved to be very effective.
Major refit in 2013-2013 when she was fitted with a new hollow mast, the deck was sheathed and the hull was stripped to bare wood, repaired and re-caulked as necessary.
Sailed by the present owner from the Shetland Islands to Cornwall in 2016, since then she has been sailed around the Cornish coast and out to the Isles of Scilly. Currently sailed without an engine, although the stern gear and engine beds are with the boat for a Yanmar 1GM10.
2013 survey available.

Construction

Planked in Pitch Pine all copper fastened to steam bent oak timbers. Hull stripped in 2013, checked repaired and re-painted.
Iron external ballast keel with black iron keel bolts. Keel bolts all new in 2000.
Sheathed plywood deck on oak deck beams.
Rig
Bermudan cutter rig on a hollow keel stepped varnished mast new in 2013.
New bowsprit with new inner and outer forestay in stainless steel.
All stainless steel standing rigging to external chain plates.
Machinery

She currently has no engine but was fitted with a Yanmar 1GM10. The engine beds and shaft log are in place for this engine and the owner will fit a replacement for a new owner.
Accommodation

Simple open plan layout with 2 settee berths.
Chart des to starboard and galley to port at the aft end of the cabin. Galley has a Taylors paraffin stove.
Bulkhead to starboard in way of the mast
Inventory

DSC VHF with new antenna
Navigation lights
Internal LEDlighting
One large and one medium CQR anchors
60m 3/8" galvanised chain
Solar panel
Auto bilge pump
Flares
Mainsail and 5 headsails
Sculling oar

Full specification and details available upon request


Disclaimer:
These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
Full Specifications

Dimensions
Length:21'
Beam:7'
General
Designer:Harrison Butler
Keel:Ballast Keel
Disclaimer: These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.
Please ensure that you check with the seller that the details in this advert are still correct before arranging to visit or buy. If you find any advert which is no longer correct then please let us know so we can keep the site as accurate as possible.